QC小组活动原因分析要点

在开展问题解决型质量管理小组活动中,原因分析不可或缺。要分析到问题的末端原因,须展示问题的全貌,从人、机、料、法、环、测,从全面到重点,从综合到局部,分析到可以直接采取对策的因素为止。掌握原因分析的技巧和要点,有效采取头脑风暴法、5why分析法、5M1E分析环节,正确使用因果图、系统图、关联图,一定能够达到事半功倍的效果。     

Process-induced variability modeling of subthreshold leakage power considering device stacking

The dominance of leakage currents in circuit design has been impelled by steady downscaling of MOSFET into nanometer regime, and has become a significant component of total IC power dissipation. The issue is further aggravated with the inability to gauge the tolerance of process parameters around their nominal value. Consequently, the drive to improve the static power prediction has enticed accurate and reliable modeling of leakage current, specifically for ultralow power applications. In contrast to gate- and band-to-band-tunneling leakages, subthreshold leakage exhibits high susceptibility to process variations and hence has been considered for variability modeling. Fluctuations in the device electrical and geometry parameters result in a wider distribution of subthreshold leakage current. Hence, taking into account stacking effect, an analytical variability model to estimate subthreshold leakage power in subthreshold circuits, in the presence of threshold voltage variations is proposed. Further, the impact of threshold voltage variability on subthreshold leakage power is modeled in conjunction with simultaneous variations in gate length and width. The leakage power variability is characterized by model-generated distributions obtained using Monte Carlo analysis and validated against SPICE simulations. The proposed model is about 700 computationally faster than SPICE simulations with mean error being less than 0.19%.     

Asynchronous adaptive output feedback sliding mode control for Takagi-Sugeno fuzzy Markovian jump systems with actuator faults

In this article, the problem of asynchronous adaptive dynamic output feedback sliding mode control (SMC) for a class of Takagi-Sugeno (T-S) fuzzy Markovian jump systems (MJSs) with actuator faults is investigated. The asynchronous dynamic output feedback control strategy is employed, as the nonsynchronization phenomenon of jump modes exists between the plant and the controller. A novel asynchronous adaptive SMC approach is proposed to solve the synthesis problem for T-S fuzzy MJSs with actuator faults. Sufficient conditions for stochastic asymptotic stability of T-S fuzzy MJSs are given. Under the designed asynchronous adaptive SMC scheme, the effects of actuator faults and external disturbance can be completely compensated and the reachability of sliding surface is ensured. Finally, an example is provided to demonstrate the effectiveness of the proposed design techniques.     

Reducing cycling costs in coal fired power plants through power to hydrogen

The increase of renewable share in the energy generation mix makes necessary to increase the flexibility of the electricity market. Thus, fossil fuel thermal power plants have to adapt their electricity production to compensate these fluctuations. Operation at partial load means a significant loss of efficiency and important reduction of incomes from electricity sales in the fossil power plant. Among the energy storage technologies proposed to overcome these problems, Power to Gas (PtG) allows for the massive storage of surplus electricity in form of hydrogen or synthetic natural gas. In this work, the integration of a Power to Gas system (50 MWe) with fossil fuel thermal power plants (500 MWe) is proposed to reduce the minimum complaint load and avoid shutdowns. This concept allows a continuous operation of power plants during periods with low demand, avoiding the penalty cost of shutdown. The operation of the hybrid system has been modelled to calculate efficiencies, hydrogen and electricity production as a function of the load of the fossil fuel power plant. Results show that the utilisation of PtG diminishes the specific cost of producing electricity between a 20% and 50%, depending on the framework considered (hot, warm and cold start-up). The main contribution is the reduction of the shutdown penalties rather than the incomes from the sale of the hydrogen. At the light of the obtained results, the hybrid system may be implemented to increase the cost-effectiveness of existing fossil fuel power plants while adapting the energy mix to high shares of variable renewable electricity sources.     

计及损耗的双馈感应风力发电机高电压穿越控制策略

利用换向原理分析其电磁暂态特性，在此基础上，对DFIG输出无功功率与其铜损耗的解析关系进行了理论分析，推导出了使铜损耗最低的DFIG输出无功功率最优参考值。同时，转子的瞬时功率补偿分量减小了DC总线电压的波动，从而减少了转换器的功率损耗。由此，提出了考虑DFIG铜损和转换器损耗的DFIG高电压穿越控制策略。仿真结果表明，该控制策略可以在保证DFIG高电压穿越能力的同时降低DFIG铜损耗与换流器损耗，并具有较好的暂态特性。     

单相并联型有源电力滤波器主电路参数耦合关系研究

单相并联型有源电力滤波器(SAPF)主电路参数之间存在一定的耦合关系,这对各参数值的合理选择有较大的影响。通过分析现有单/三相SAPF主电路交流侧电感以及直流侧电压、电容值等参数的计算方法,得到了具体的单相SAPF电路参数解析表达式。针对所得表达式各变量之间的耦合关系,在MATLAB中进行建模优化分析,得出一套完整的参数设计方案。保证在特定负载下补偿后谐波含量低于2%的综合优化目标。仿真和实验过程验证了所选参数的正确性。     

正压给水的主排水泵启动特性仿真分析研究

峰峰集团某矿排水系统在采用正压给水方式后主排水泵泵效明显提高,为了研究排水系统的启动特性,利用Flowmaster软件建立了离心泵串联系统模型。根据水力机械试验室的设备参数进行了仿真,分析了正压给水条件下主泵定量启动前由单泵和双泵组成的排水系统特性。在此基础上,得到了离心泵瞬时启动转速和功率的特性曲线。结果表明,在正压给水条件下,主泵启动功率的影响基本消除,主泵功率达到稳定值的时间缩短。提高了主排水泵的效率,提高了排水系统的综合效率。     

Enabling supercapacitors to compete for ancillary services: An important step towards 100 % renewable energy

While wind and solar generation has increased dramatically over the past decade, there has been a much larger increase in gas generation (eia, 2019). This is driven in part by low gas prices but also in part by how electricity markets are organized. The intermittent nature of wind and solar generation increases the need for more flexible and reliable generation; a role gas plants fill well. However, current market structures and rules unfairly tip the balance in their favor compared to energy storage systems. They have created market barriers restrictive enough to prevent market participation of a technology key to a 100 % renewable grid: supercapacitors. Adjusting markets to remove the market barriers to supercapacitor and other energy storage systems will allow for increased renewable penetration while simultaneously improving grid performance and reducing costs.     

CNG-电混动公交车道路行驶工况与排放特性研究

CNG-电公交车以天然气作为发动机燃料,辅以电机共同驱动的混合动力车辆,车辆行驶速度低、启动频繁等特性,发动机实际运行工况与型式检验工况具有较大差异。为研究其实际行驶工况与排放特性,选取4辆国V排放标准的CNG-电混合动力公交车,往返于市区与城郊,使用PEMS(portable emission measurement system)实时收集车辆行驶及NO_X排放数据。结果表明,发动机运行工况集中于中低功率段,与型式检验工况差异较大,污染物排放集中于发动机切入车辆传动系统的临界车速附近。     

矿产资源供应能力评价的FAHP方法

为了合理地开发和利用资源，提高资源利用效率和矿业发展质量，科学论证与评价矿产资源供应能力，具有重要的理论意义和现实意义。采用定性定量相结合的模糊层次分析法（FAHP），构建了矿产资源的供应能力的评价模型，并以我国2006—2015年钴资源的历史数据为例，将资源禀赋、供需市场、政治环境作为评价准则，通过对评价指标进行分析，得到了钴资源供应能力的评价值均在1以下，并呈现逐年下降趋势。研究结果表明，我国钴资源的供应能力整体偏弱，今后几年钴资源供应能力仍会维持在较低水平。